Door/Window Sensor 2 – Contact sensor with a temperature measurement feature.
Fibaro Door/Window Sensor 2 is a wireless, battery powered, Z-Wave Plus compatible magnetic contact sensor. Opening is detected by separating the sensor’s body and the magnet. Sensor can be used to trigger scenes and wherever there is a need for information about opening or closing of doors, windows, garage doors, etc. In addition, the Fibaro Door/Window Sensor 2 is equipped with a built-in temperature sensor.
Perfect combination in one device
The Fibaro Door/Window Sensor 2 combines the functionality of the 2 devices: contact and temperature sensors in one easy to use product. It also has a double tamper protection. This perfect combination of functionalities let you increase your comfort and safety.
Tamper and damage protection
The Fibaro Door/Window Sensor will immediately inform you about any attempts to remove the sensor or open its case. You can be sure that you and your family are protected.
Use it in any place you want
The Fibaro Door/Window Sensor 2 may be installed anywhere in the house thanks to the wireless Z-Wave network communication using double stick sided adhesive tape. It seamlessly fits into any interior design and is very simple to install. It’s a battery operated device and does not require any wires. There are many places where this sensor would be very useful – it’s on you to discover it!
Integrated temperature sensor
Control the temperature anywhere in the home. The Fibaro Door/Window Sensor 2 measures the temperature thanks to built-in temperature sensor.
If any of your door or window was left open by accident, the Fibaro Door/Window Sensor will send you information about it directly to your smartphone.
The Fibaro System allows you to arm your devices. In case of tampering, an alarm scene will be activated and notification will be send.
The Fibaro Door/Window Sensor 2 is prepared for wireless software update. It also supports protected mode (Z-Wave network Security Mode) with AES-128 encryption.
The Fibaro Door/Window Sensor 2 adds to the Z-Wave network just like any other Fibaro product – set the Home Center 2 or Home Center Lite into the Learn Mode and push the device button quickly 3 times or do it via mobile app. The Fibaro Door/Window Sensor 2 is ready to operate.